Northern white cedar firewood: BTU, weight and seasoning
Also called eastern arborvitae. How much heat it gives, what a cord weighs, how long it takes to season and how it burns.
Last reviewed November 17, 20262 min readBy Lorne Wanamaker, firewood seller
On this page· Heat per cord
Quick answer
- About 13.1 million BTU per cord at 20% moisture (13.9 GJ).
- A seasoned cord weighs about 2,080 lb (940 kg).
- Season it for at least 9 months.
- Ash: high. Coals: low. Burn time: short.
Heat per cord
Northern white cedar is a softwood. At 20% moisture, a full cord holds about 13.1 million BTU of heat (13.9 gigajoules). Wetter wood gives less, because part of the heat goes into boiling off the water.
That ranks northern white cedar 555th of the 558 species in our tables, from the hottest down.
Weight and density
A full cord of seasoned northern white cedar (20% moisture) weighs about 2,080 lb (940 kg). Freshly cut, the same cord weighs about 2,820 lb (1,280 kg): the difference is water you don't want to burn.
Its specific gravity, a measure of density, is 0.35. Denser wood packs more heat into each cord.
Seasoning time
Split and stacked off the ground, northern white cedar needs at least 9 months to dry to about 20% moisture.
Wood dries faster once it is split and stacked with air around it. A moisture meter on a fresh split face tells you when it is ready.
How it burns
- Ash: high
- Coals: low
- Burn time: short
We rate northern white cedar 1 out of 10 as firewood: it burns, but denser species give more heat for the same work.
Similar firewood
Other species to compare with northern white cedar:
- Aromatic red cedar: 19.9 million BTU per cord
- Atlantic white cedar: 14.2 million BTU per cord
- Incense cedar: 14.4 million BTU per cord
- Port Orford cedar: 17.4 million BTU per cord
Where it grows
Northeastern North America
Where these numbers come from
The heat and weight figures come from our firewood tables, worked out the same way for every species at 20% moisture. See how we calculate them.
Questions
Is northern white cedar good firewood?
It burns, but we rate northern white cedar only 1 out of 10: denser species give more heat per cord.
How long does northern white cedar take to season?
At least 9 months, split and stacked, to reach about 20% moisture.
How much does a cord of northern white cedar weigh?
About 2,080 lb (940 kg) seasoned, and about 2,820 lb (1,280 kg) green.
How many BTU are in a cord of northern white cedar?
About 13.1 million BTU (13.9 GJ) per full cord at 20% moisture.